Woodworking Engraving Machine Tool And Workpiece Stability

- Jul 13, 2017-

Woodworking Engraving Machine as a mechanical equipment, has its own characteristics, as the machine operator, how to master these features on the day-to-day operation of the machine to provide protection is very important, so familiar with the Woodworking Engraving Machine routine maintenance method is the machine operator A request.

First, the regular inspection of woodworking machine parts of the machine screws whether there is loosening phenomenon.

Second, regular cleaning wood carving machine electrical box inside the dust, check the terminal screws are loose, to ensure the circuit safe and reliable.

Third, if long-term use of Woodworking Engraving Machine, should be regularly weekly air refueling, preferably for each week to ensure the flexibility of the transmission system.

Fourth, the requirements of Woodworking Engraving Machine for 10 hours / day or less; to ensure that the cooling water and the normal operation of the pump, water cooling spindle motor must not be the phenomenon of water shortage, regular replacement of cooling water to prevent water temperature is too high, Circulating water as much as possible, you can change large capacity water tank.

Fifth, each time the use of Woodworking Engraving Machine is completed, pay attention to clean up, must be platform and transmission system on the dust clean up; regular transmission system X, Y, Z three-axis lubrication refueling.

Sixth, the operator is in the operation of Woodworking Engraving Machine to wear dust masks and protective glasses, in order to avoid the dust generated when processing into the human body, causing discomfort.

Seventh, choose the Woodworking Engraving Machine is to choose a large brand of Woodworking Engraving Machine, such as anti-engraving engraving machine, this brand engraving machine machine itself may be attached to a single vacuum and dust collection device.

Eighth, Woodworking Engraving Machine routine maintenance method to Woodworking Engraving Machine with a certain dust and dust removal device, choose to use supporting dust removal equipment.

How to choose Woodworking Engraving Machine tool?

1, the nature of the material being cut

Wood cutting is made of solid wood and wood composites. Wood composite materials, including veneer lumber, plywood, particleboard, oriented particleboard, large particleboard, gypsum particleboard, cement particleboard, hard fiber board, medium density Fiberboard, high-density fiberboard, blockboard, glued wood and so on. Some wood or wood composite workpieces are also treated with single or double veneer finish.

2, cutting direction

Solid wood cutting, according to the direction of the blade relative to the direction of wood fiber cutting is divided into vertical, horizontal, end and longitudinal, vertical and horizontal and horizontal cutting.

3, tool rotation direction and feed direction

Depending on the direction of rotation of the machine tool axis and the direction of the feed of the wood workpiece, determine the inclination of the blade on the tool.

4, tool and workpiece stability

The stability of the tool and the workpiece in the cutting process includes several aspects of the content, the stability of the workpiece is the wood workpiece in the cutting process in a smooth feed without jitter. Measures to improve the stability of the workpiece to reduce the workpiece center of gravity and increase the contact area.

5, processing surface quality requirements

Wood surface quality includes surface roughness, geometry and shape position accuracy.

Previous:Laser Cutter Reduce Downtime And Increase Productivity Next:Laser Cutter The Lighter The Texture, The Higher The Cutting Quality