Improve the efficiency of woodworking engraving machine is tantamount to improve the production efficiency of the enterprise development and growth are very necessary. People continue to improve the woodworking engraving machine performance, function, and strive for enterprises to create greater value. Therefore, to improve the efficiency of woodworking engraving machine is the best embodiment. However, there are many ways to improve the efficiency of woodworking engraving machine, Xiao Bian from the engraving machine under the knife depth to introduce the analysis of woodworking engraving machine to improve the efficiency of small tips.
1, according to different materials to determine the different amount of knife. As the different materials of the tool will have a maximum amount of knife to eat, we use woodworking engraving machine for processing, try not to use the largest knife to eat the amount of processing, long processing, then the tool damage faster. But also in the maximum amount of knife to eat when the processing speed is also not up, the speed is likely to cause a broken knife soon. So we can not set the amount of knife into the maximum amount of 2/3, so that tool life will be greatly increased, the processing speed can also improve a lot; this one can save both the cost of the tool can also improve the processing efficiency.
2, according to the thickness of the carved material to determine the knife depth. We have to be rough according to the actual situation, and then finishing. When the roughing, as much as possible to remove all the margin, save finishing time; can also use better processing tool material. Woodworking engraving machine performance is not only reflected in the hardware configuration of the machine, but also our long-term accumulation of processing experience, to improve the processing efficiency of engraving machine.
1. Woodworking engraving machine running time of 10 hours a day to ensure that the cooling water and the normal operation of the pump, water cooling spindle motor must not appear water shortages, regular replacement of cooling water to prevent water temperature is too high, as much as possible , Can change large capacity water tank.
2, woodworking engraving machine each machine is completed, pay attention to clean up, be sure to platform and transmission system on the dust clean, regular (weekly) on the transmission system (X.Y.Z three-axis) lubrication refueling.
3, woodworking engraving machine machine if not long, should be regularly (weekly) refueling to go, to ensure the flexibility of the transmission system.
4, woodworking engraving machine regularly (according to the use of) clean up the electrical box of dust, check the terminal screws are loose, to ensure the circuit safe and reliable use.
5, woodworking engraving machine regularly (according to the use of) check the machine parts of the screws are loose.
Woodworking engraving machine is mainly used for wood processing, making it more beautiful value. Woodworking engraving machine a wide range of brands are also many, resulting in uneven prices.
It is divided into three control methods:
1, all the work done by the computer control, engraving machine at work when the computer is in working condition, can not carry out other typesetting work, may be caused by the misuse of the computer waste;
2, the use of single-chip control, engraving machine at the same time can be typesetting, but can not turn off the computer, can reduce the computer caused by misuse of waste;
3, the use of USB port transmission of data, the system has more than 32M of memory capacity, save the file can be completely out of the computer, turn off the computer or other typesetting, can greatly improve work efficiency.