PU film is the material which we need to use on cutting plotter. It must be kept well and should not be exposed to the sun! Be sure to roll up after use! It is recommended to use rubber bands to put them in a cool and dark place, otherwise it will be easy to foam!Printers that use weak solvent inks print beautiful patterns that can be printed on leather, fabrics, T-shirts, hats, sportswear, sweaters, bags, mouse pads, and more.Made of new nano materials, it is washable, resistant to yellowing, and cuts more smoothly. This product can transfer delicate patterns on dark, light-colored textiles and leather.Solvent ink, weak solvent ink, universal ink, inkjet printer with oily ink, photo machine, Epson large-format machine modified weak solvent ink machine can print. Printers such as Roland, Mimaki, Mutoh, etc.
Use computer layout design, the printer prints the pattern; Use vinyl plotter to cut along the edge of the pattern; Tear off the blank part; If the pattern is a single pattern, you can directly separate the pattern from the film and transfer it directly to the clothes. If the pattern is scattered, please use the transfer film to separate it from the bottom film;The temperature of the heat press machine is set at about 155 °C for 15 seconds. Moderate pressure;Put the clothes on the heat press machine and press 1-3 seconds to remove the moisture; Print the pattern and place it face up in the desired place; Put the insulation paper and press the handle of the heat press machine; When the time is up, lift the machine, tear off the positioning transfer film, and transfer is completed.
For more Cutting Plotters of MYCUT, please check: